Ghost Immobiliser Fitting
Secure your vehicle from key theft, cloning and hacking by using the first aftermarket CAN-Immobiliser. The Ghost app and GPS tracking can be linked to the immobiliser to send you alerts when your car is stolen or tampered with.
Installing a Ghost immobiliser is relatively straightforward for a skilled technician. It is essential to have the proper tools and heat shrink tubing.
Getting Started
Contrary to physical theft protection devices like wheel locks and car alarms, ghost immobilisers safeguard your vehicle without the use of LEDs or key fobs. They are directly connected to the ECU CAN data network, and can only be activated by entering a PIN code. This provides a higher level of protection against key hacking, ECU swapping and cloning.
Installing a ghost immobiliser Birmingham requires a high level of agility and accuracy. It's like walking through a minefield. A mistake could result in serious damage to your vehicle's electrical circuits. To avoid this, it's essential that you know the procedure for installing and prepare your vehicle for the installation process.
The first step is to prepare the vehicle by removing the interior panels to make room for the immobiliser device. Once you've found the perfect place to hide it then use cable ties to fix it. Clean your wiring by connecting loose wires and using insulation tape to cover the exposed connections. This reduces the risk of an accidental short circuit, while improving the aesthetics and reducing the chances of theft.
Identify a constant source of 12V power and a grounding for the ghost immobiliser. Once you've located these, test the power wires with a multimeter to make sure they're delivering the same voltage. Connect the CAN H & the CAN L wires of your immobiliser to the grounding and power points.
After you've made all the connections required, it's important to double-check the connections and examine the immobiliser for signs of corrosion or other damage. You should also test the system to ensure it is working properly by entering a pin code and then starting the engine. This should be a regular part of your daily routine since it allows you to identify any issues that may arise early. Regular testing also helps to extend the life of the device, and keep it operating at peak performance.
Preparing your vehicle
Installing a Ghost immobiliser requires skills and knowledge. A wiring diagram is crucial to identify the right wires, making accurate connections and ensuring security. A multimeter is a tool to test electrical values and guarantee security. Insulation tape and cable ties can be used to protect connections from being tampered with and to keep them neatly secured. A user's manual will provide specific guidance tailored to your Ghost Immobiliser model.
Once installed, a ghost immobiliser is able to prevent unauthorised engine start by requiring the driver to enter a unique PIN sequence using buttons on the steering wheel or on the centre console. This can be done either manually or remotely through a mobile phone app, and the code can easily be altered by the owner of the vehicle at any time. The device is also silent and is undetectable by thieves as it does not emit any radio frequency.
Ghost immobilisers are directly connected to the CAN bus of the vehicle, a network which communicates with the electronic control units (ECUs) of the vehicle. It intercepts the signals sent by ECUs and shuts down the engine if a false one is identified. The system is weatherproof and tamper-proof. It does not have LED indicators or keys to draw the attention of thieves.
It can be placed behind the dashboard or in an inconspicuous area, so it isn't seen by thieves and does not interfere with the vehicle's performance. It can even be mounted in a small box and makes it less likely to be discovered during a test drive by unscrupulous salespeople for cars.
Its stealthy operation, along with its integration into the vehicle's CAN-bus system, can be an effective deterrent to modern vehicle theft techniques, such as signal relay attacks and key copying. Combining the system with other security measures will create a powerful barrier to frustrate even the most persistent thieves. More and more insurance companies are recommending or require ghost immobilisers as they can cut down on the cost of insurance.
Making Connections
Contrary to traditional security systems which are heard by thieves, ghost immobilisers are silent and stop them from knowing that your vehicle is turned on. They also block high-tech methods employed to steal vehicles, like OBD port hacking. Installing love it without leaving permanent marks on your vehicle is a great alternative for those planning to sell their vehicle in the near future.
The Autowatch Ghost 2 CANbus immobiliser is among the most recent and most reliable options to stop car theft. It disables your engine using the CAN data network and generates a unique PIN number which is difficult to steal from criminals. It can be used on a wide range of vehicles, and it works with a variety of features already installed like car alarms and steering wheel locks. GPS trackers and door lock bypass.
If you opt to use an Ghost immobiliser for your vehicle, make sure you refer to the wiring diagram to identify the wires to connect. Verify their positions to ensure they are accurate, and label them or tape them to help you remember them. You will also need to find a source of constant power (12V) and a grounding point to the system. Once you have all the components, you can begin making connections to complete the installation.
The ghost immobiliser will not allow your vehicle to start until you enter a pin code through the buttons of the dashboard or steering wheel. This will stop ECU hacking, key cloning, and other methods of theft from vehicles. It can also be used with other Thatcham approved security accessories such as alarms and tyre clips to give your car an even greater degree of security.
As the UK automotive aftermarket industry expands, so do the options for securing your vehicle. There are a myriad of ways for thieves to get into your vehicle and steal it, therefore it's vital to do all you can to stop it from being taken away. That's why ghost immobilisers have become such a popular choice among responsible car owners.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU via an CAN network. This stops the engine from starting until the PIN code has been entered. This makes it extremely difficult for thieves to steal your key fob to start your vehicle, and even harder to disable the system through hacking its electronic.
Ghost Immobilisers are also able to be used together with GPS tracking devices, which can help you track your vehicle's location and identify it in the event of theft. This feature is not an option that is commonly used in security products sold by the aftermarket, but it's a great option to increase your security and give you assurance that your vehicle is always secure.
The Ghost-II immobiliser is not just a source of greater security, but also a convenient experience for the user, by not having to use additional key fobs or devices. It has a simple, intuitive PIN code entry that integrates seamlessly with your everyday routine. In addition, it offers deactivation modes and convenience features that let you temporarily disable the immobiliser to allow valet parking or for servicing.
Prepare the necessary tools and become familiar with the wiring of your vehicle. A basic set will enable you to make precise connections. A multimeter is a tool to test electrical values. Insulation tape and heat shrink tubing are essential for protecting connections from short circuits and cable tie can be used to secure the wiring in the correct position. Lastly, it's important to be in a well-lit space and wear appropriate safety gear when working with tools and electrical components.
You should test the Ghost immobiliser after having completed the installation to make sure it is working properly. First, you need to try to start the vehicle without entering the PIN code. If this fails, you'll have to retest the system and conduct a thorough examination of the connections.
Unlike other security systems unlike other security systems, unlike other security systems, the Ghost Immobiliser is a covert device that cannot be detected by thieves and is much more effective than conventional physical deterrents like wheel clamps or steering locks. It is TASSA recognized and approved by some insurance companies, making it an investment that is cost-effective and will provide you with peace of mind you need.